Technical expertise

From powder selection to the sintered part

Feedstock decisions affect every step of ceramic injection molding. Review the full process when deciding what to change and how to test it.

Technical lead

More than 10 years in ceramics

Our technical lead is a ceramic engineer with experience developing and adjusting formulations for different application requirements. The first step is a review of the powder, equipment, and part requirements to identify which formulation changes are worth investigating.

Engineering approach

What changes when the feedstock changes?

Powder and binder
Particle size, morphology, and surface chemistry influence packing, wetting, dispersion, and flow. A binder may use a backbone polymer for handling strength alongside lower-molecular-weight components and additives that affect processing.
Loading and mold filling
Higher solids loading can reduce the volume of binder to remove, but loading near the formulation’s packing limit can raise viscosity and narrow the molding window. Compare rheology at relevant temperatures and shear rates, and check for segregation in the actual tool.
Green strength and debinding
Green-part handling and shape retention depend on binder behavior and the part’s geometry. Thick sections can slow binder removal. Match the removal route to the binder system and assess cracking, distortion, and residue in the process.
Consistency and dimensions
Variation in dispersion and green density can carry through to sintering. Measure shrinkage along the dimensions that matter, under the intended thermal cycle, before committing to tooling compensation or a lot-to-lot tolerance.

Sources for general CIM principles